Aluminium Fabrication Contractors in Navalur

If you’re comparing aluminium fabrication contractors in Navalur, you’re probably trying to finish a house, villa, or apartment work without getting stuck on crooked frames, leaking joints, or delayed site handover. The fix is not a fancy brochure; it’s measured work, proper section selection, and clean fixing on a site that’s already tight on time.

We handle aluminium fabrication for windows, partitions, railings, grill inserts, doors, louvers and site-specific frame work. In Navalur, that usually means working around fast-moving residential builds, access roads that fill up with traffic, and owners who want the work to be ready before painting or final fit-out starts.

What Navalur sites ask of aluminium work

Navalur is not a place where you can treat fabrication as a shop job and then “fix later” on site. Most plots and projects here are part of a fast growth belt with apartments, villas and builder floors moving at the same time, so the work has to fit the opening exactly the first time. If the measurement is taken before plaster cure, if the wall line is off by even a little, or if the frame is pushed in without checking level, you see it later as gaps, shutter rubbing or water ingress at the first hard rain.

The other issue is site logistics. In a growing area like this, there’s often limited storage space, shared access with other trades and a schedule where painting, glass fixing and electrical finishing all overlap. So the fabrication has to be planned around delivery size, installation order and how the material will move from road to opening without damage. That is where a local crew helps: not by claiming magic, but by knowing how much can actually be handled in one day and what needs to wait for the plaster and sill to settle.

What matters in practice is not just the alloy profile. It is the measurement discipline, the fixing method, the sealant line, the hardware choice and the person supervising the work while it is being installed. A neat showroom sample can still fail on a site if the sill slopes the wrong way or the anchor points are rushed.

Sections, fixing and the details that fail first

For aluminium fabrication, the common jobs are windows, door frames, sliding shutters, ventilators, partitions, handrail components and custom covers around services. The right section depends on opening size, wind exposure, how often the shutter is used and whether the frame is meant to take glass, mesh or a combination. In coastal Chennai we also keep an eye on corrosion resistance, but even inland work fails when the profiles are too thin, the corners are badly joined or the fixing is done with the wrong screws.

What a proper installation needs

We look at the opening size, wall thickness, plumb line, sill level and whether the surrounding masonry is ready to receive the frame. That sounds basic, yet these are the things that decide whether the shutter closes smoothly after six months. A good aluminium frame should sit true, be fixed at regular points, and leave a consistent gap for sealant and finishing. The hardware has to match the use: a bedroom window doesn’t need the same latch or track choice as a heavy balcony shutter.

We also don’t ignore the finishing side. If the adjacent plaster is uneven, the frame can look blamed for a wall problem. If the sealant joint is thin, rain will find it. If glass thickness and groove depth don’t match, rattling begins. Most of the repairs we see later are not “material failure” in the dramatic sense; they’re the result of one skipped check at the start.

1. Measure after the opening is ready — we verify wall size, sill level and diagonal squareness before any cutting.
2. Prepare the shop drawings — the section size, shutter type and fixing points are frozen before fabrication starts.
3. Fabricate and pre-check — frames are cut, assembled and dry-fitted, usually within a few working days depending on quantity.
4. Install and seal on site — the frame is aligned, anchored and sealed, then tested for smooth movement and visible gaps.
5. Hand over after finish coordination — we check with the plaster, paint and glass stages so nobody traps the frame with the wrong sequence.

How to judge a contractor before you sign

People usually ask us who they should trust. Fair question. For aluminium work, the safest way to choose is to ask for the section detail, the fixing method and the BOQ, not just the square-foot rate. A low rate can hide a thinner profile, fewer anchoring points or cheaper hardware. That looks fine on day one and becomes your problem after the first monsoon wind or after the shutter is opened and closed every day for a year.

Ask for these items before you pay an advance:

• The exact profile section and finish proposed for each opening.
• Whether the rate includes glass, mesh, handles, locks and sealant.
• How the frame will be fixed to masonry or RCC edges.
• Who measures on site and who checks the final fit before installation.
• How revision or rework is handled if the opening size changes after plaster.
• Whether the work is coordinated with the civil and painting stages.

A fair contract should not be vague. It should say what is being fabricated, what finish is being supplied, what is excluded, how many measurement visits are covered and when the payment becomes due. If the agreement only says “aluminium work as required,” you are taking the risk, not the contractor.

Rates, scope and what changes the price

For Chennai, aluminium fabrication is usually priced based on the work type, section, hardware, glass or mesh inclusion, and site conditions. If you’re comparing aluminium fabrication contractors in Navalur, don’t compare only the starting figure. The real cost moves with opening size, number of shutters, fixing complexity, site access and whether the work needs extra protection because other trades are still active. A detailed BOQ settles the actual figure before the contract is signed.

We do not quote a total project price on a public page. What we can say is that the construction and fit-out rate structure depends on the head of work and the finish level. For aluminium-related interior and fabrication items, the rate usually sits within the interior works band, but the final number changes if you are combining it with glass, partitions or custom carpentry coordination.

If you want a usable Chennai figure to plan with, the broader interior works band is ₹1,200 – ₹2,500 per sq ft, but that is only a reference band, not a quotation for your opening. Aluminium-only items are not priced honestly by pretending every frame is the same. They are priced by size, section, hardware and installation condition.

How we handle the work on site

We keep the technical work in-house. Our civil engineers and structural engineer check the opening conditions, and a site engineer is on the work every working day. For clients who cannot come to the site often, we send weekly photo updates by WhatsApp. That matters because aluminium work is usually one of the last visible items before handover, and owners want to know whether a delay is the contractor’s fault or the result of a wall that changed after plaster.

We also write the BOQ before contract signing, so the scope is clear from the start. That means less argument over whether a sealant line, handle or mesh insert was included. If you are planning a new home or a villa in Navalur, our residential team can coordinate aluminium work with the civil and finish stages; for larger mixed-use jobs, our commercial team handles the sequencing with the same measurement discipline.

You can call us at +91 97107 13838 or email info@shalomconstruction.com. If you prefer to visit, our office is at No. 45, 2nd Main Road, Abirami Nagar, Koladi, Thiruverkadu, Chennai – 600077.

Frequently Asked Questions

If you’re at the stage where the masonry is ready and you want the aluminium work measured properly, we can look at the site, write the BOQ and tell you what the opening actually needs. That saves arguments later, which is usually the cheapest part of the job.