Kitchen Renovation Contractors in Egmore

If you're looking for kitchen renovation contractors in Egmore, you're probably dealing with an old kitchen that no longer works for daily use. In this part of Chennai, the problem is usually not just looks; it's weak plumbing, tired electrical points, poor ventilation and a layout that wastes every inch.

We handle kitchen renovation in occupied homes, where dust, water shut-off and neighbour access all matter. This page explains what gets changed, what should not be touched casually, and how to tell whether your kitchen needs a full rebuild or a careful repair with new finishes.

What Egmore kitchens usually need

Egmore has a lot of older apartments, compact independent homes and buildings that have seen more than one repair cycle. That shows up inside the kitchen first. Cupboards are often built around old plumbing, sink lines are hidden without access panels, and the electrical load is still what it was years ago, even though the appliances have changed. When you open up such a kitchen, we usually find a mix of aged GI piping, patched tile joints and uneven wall plaster that needs correction before any shutter goes in.

The site reality matters too. Access roads can be tight, parking is never casual, and work hours need to fit the building's routine. In a shared block, one careless demolition day can create complaints from three floors. So the plan is not just about cabinet style. It starts with demolition control, debris removal and a way to keep the house usable while work goes on.

How the kitchen should be rebuilt

A proper kitchen renovation starts with the services, not the finishes. We inspect the sink location, drain fall, water supply line, exhaust route, electrical load and wall condition before we draw the cabinet layout. If the base is wrong, a glossy shutter only hides the problem for a few months. The right sequence is: check, strip, repair, route services, finish surfaces, then install storage. That order keeps you from paying twice.

What we change first

We begin with the wet work because that's where most kitchen failures start. Water seepage behind the sink, tile cracks around the counter and a damp skirting line are all warning signs. If the platform height is wrong, or the sink drain has no proper slope, the fix is structural in a small way but important. We also look at wall straightness. In older Chennai buildings, a cabinet can be fabricated perfectly and still sit badly because the wall is out of line by more than the eye wants to admit.

1. Site inspection and measurement — 1 visit, usually the same day if access is possible. We note the existing plumbing, electrical points, slab condition and door swing.
2. Demolition and debris removal — 1 to 3 days for a standard kitchen. This includes removing old counters, broken tiles, loose plaster and damaged shutters.
3. Service correction — 2 to 5 days. New plumbing lines, drain adjustments, electrical point shifting and exhaust provision happen here.
4. Surface preparation and finishes — 4 to 7 days. Waterproofing, plaster touch-up, tiling, painting and platform work are completed before carpentry.
5. Cabinet fabrication and fixing — 5 to 10 days depending on size and finish. Shutters, carcass, hardware and accessories are fitted after the base is stable.

Choosing the right scope

Not every kitchen needs a full gut renovation. Sometimes the structure is sound, the slab is dry and the plumbing is acceptable, but the storage is poor and the worktop is too small. In that case, changing cabinets, countertop, sink, backsplash and lighting may be enough. Full demolition makes sense when the kitchen has repeated seepage, failing tiles, unsafe wiring or a layout that simply cannot work for the way you cook.

The trade-off is simple. A partial renovation saves money and time, but it keeps whatever hidden problem still sits behind the wall or below the floor. A full renovation costs more and takes longer, yet it lets us reset the services properly. We tell clients the same thing we would tell a relative: don't spend on shutters if the drain line is still wrong.

• Check whether the sink area has damp patches or a salt mark at the bottom of the wall.
• Ask whether the existing electrical board can take the load of microwave, chimney, fridge and mixer use together.
• Confirm if there is an exhaust route to the outside or only a recirculating chimney option.
• See whether the counter height suits the person who cooks most often, not just a standard number on paper.
• Look for a proper service access panel near concealed plumbing points.
• Insist on a detailed BOQ before work starts, especially if you want mixed materials or hardware upgrades.

Cost, approvals and what actually changes the price

Kitchen renovation costs in Chennai move with the size of the kitchen, the amount of civil work, the hardware you choose and how much rework the old services need. For interior works, the usual rate range is ₹1,200 to ₹2,500 per sq ft, but that figure is only a starting point. A kitchen with simple repainting and cabinet replacement sits far below a kitchen that needs new plumbing, electrical rewiring, waterproofing and tile replacement. The BOQ settles the real figure before any contract is signed.

In Egmore, approvals are usually less about a fresh building licence and more about what the apartment association or building management will allow inside the flat. If a wall is being altered, or if plumbing and electrical rerouting touches common services, that has to be planned carefully. We also keep an eye on debris movement and material stacking because old city plots and apartment corridors don't forgive casual work. If the building has tight access, the schedule has to be built around lift timing, truck entry and the daily life of the people upstairs.

How we work on occupied homes

We do kitchen renovation with in-house civil engineers, a structural engineer and an architect. A site engineer is on site every working day, and if you can't visit, we share weekly photo updates by WhatsApp. Before the contract starts, you get a BOQ and a milestone-linked payment schedule, so you're not guessing what each stage costs. For homes in and around Egmore, we also plan the messy work first, because that is what keeps the rest of the house livable.

If your kitchen needs redesigning, reworking or a full rebuild, call us at +91 97107 13838 or write to info@shalomconstruction.com. You can also reach our office at No. 45, 2nd Main Road, Abirami Nagar, Koladi (Landmark: Ratna Chamber), Thiruverkadu, Chennai – 600077. We can start with a visit, a measurement set and a BOQ.

Frequently Asked Questions

If your kitchen has reached the point where patching no longer makes sense, the next step is a proper inspection. We look at the base, the services and the way you actually use the room, then we tell you what's worth keeping and what isn't.