Floor Tile Contractors in Porur

If you are comparing floor tile contractors in Porur, the first thing to check is not the tile brand. It is whether the old screed is sound, level and dry enough to carry the new finish without hollow patches later.

Most calls we get are from people who already bought the tiles and now want the work done without cracks, lippage or loose corners near the kitchen and bathroom thresholds. That is the right time to ask questions about substrate repair, adhesive choice, grouting and the day-by-day sequence.

What Porur sites change before the first tile is laid

Porur is not a place where you can treat every floor the same. We see a mix of apartments, independent houses and commercial interiors, with some sites having old cement floors that were patched many times and others starting from a fresh slab. Near the lake side and the busier roads, access for material stacking is tight, so the work area has to stay clean and compact. In a lived-in house, you also need dust control and room-to-room staging because the family still has to walk through parts of the site.

The real decision on these jobs is whether you can tile directly over the existing base or whether you must remove weak patches, cut out loose plaster at the skirting line and re-screed the floor first. If the floor already has settlement cracks, laying over them only hides the problem for a few months. The tile does not create strength; it follows the base below it.

That is why we start with the level, the soundness of the concrete and the moisture condition, then decide the method. On a Porur renovation, that one inspection saves far more money than a cheap tile quote ever does.

How we treat the floor below the tile

Good tiling is mostly hidden work. The visible finish gets attention, but the floor that accepts the tile is what decides whether the job lasts. We check for loose screed, dusting concrete, old polish residue, oil stains near utility areas and uneven joints at door crossings. If the base is weak, we do not ask the adhesive to solve it. We repair the base first.

What a proper substrate needs

The base should be clean, firm and reasonably flat. For new work, we look at the slab curing, the screed thickness and the slope to wet areas. For renovation work, we check whether the previous tile layer is bonded well enough to stay or whether it should come out. A floor with a drum sound in patches is telling you the bond has already failed. Ignoring that sound is how the next layer fails too.

For bathrooms, balconies and wash areas, the slope matters as much as the tile itself. Water must move to the drain without standing in the corner. Once the finish is fixed, you cannot correct a bad slope without breaking the work again.

1. Site check and measurement — We measure the area, check door levels and identify damaged patches. This usually takes a few hours on a house floor.
2. Removal or base repair — Loose tiles, weak screed and cracked patches are removed first. Minor repairs may take one day; larger repair areas need more.
3. Level setting and dry trial — We mark lines, set slopes in wet zones and test tile layout before adhesive starts. This avoids awkward cuts at visible edges.
4. Tile laying and alignment — Tiles are fixed in sequence with joint control and edge checks. A normal room is often completed in one to two working days.
5. Grouting and final cleanup — Joints are filled, residue is cleaned and the floor is left to cure. Foot traffic is restricted for the curing period.

Choosing the right contractor for the finish you want

If you are comparing tile contractors, the question is not who says yes first. It is who can explain the base preparation, the joint width and the curing time without guessing. Ask what happens if the old slab has hairline cracks. Ask whether they will recheck levels at the doorway after layout. Ask what they will do if the tile batch has a shade difference between boxes. A contractor who works daily in the field has answers for those questions.

You should also ask for the BOQ before the deal is closed. The BOQ should say what tile size is being laid, what adhesive or bedding method is assumed, what base repair is included, and whether skirting, threshold strips and demolition are part of the scope. If you skip that conversation, the price looks neat at first and grows later through extras.

• Check whether the floor is being prepared before laying, not just cleaned with water and left to dry.
• Ask how level differences at room junctions will be handled.
• Confirm whether skirting, edge trims and threshold finishing are included.
• See how grout colour and joint width will be decided before work starts.
• Find out who will be on site to approve the pattern and the first line of tiles.
• Make sure the contract says what happens if hidden cracks appear after removal.

Cost, material choices and what really moves the rate

Tile work cost in Porur depends on the tile type, the condition of the old floor, room count, adhesive method and how much cutting is needed around columns, toilets and kitchen platforms. For interior flooring, the labour portion is usually only one part of the real spend. The base repair and replacement of damaged screed often decide whether the job stays simple or becomes a full renovation item.

For general Chennai pricing, the work itself is often aligned with the broader interior works band of ₹1,200 to ₹2,500 per sq ft when the scope is part of a larger fit-out, while painting and other finishing tasks sit in their own bands. Tile laying alone is not priced honestly by a single number on a public page because the base may need patching, the tile format may be large, and the site may be occupied. We settle the real figure through a detailed BOQ after seeing the floor.

The common mistake is to chase a lower labour quote and ignore the base. That works only when the floor is already good. If the screed is weak, saving a little on preparation can cost you a full relaying job later. The smarter saving is choosing a tile size and pattern that fits the room without too many cuts.

What we do on site

We handle flooring through our in-house civil team, so the person looking at the floor is the same person who understands the structural side of the building. On an occupied home in Porur, our site engineer stays involved every working day, and we share photo updates for clients who cannot be there. We write the BOQ before the contract, then fix the sequence and payment stages in the agreement. If you want us to look at a room, a kitchen or a full house floor, call +91 97107 13838 or write to info@shalomconstruction.com. You can also see our interior work and renovation pages for related scope.

Frequently Asked Questions

Porur floors can be made neat without being fragile, but only if the base is treated as part of the work and not as a nuisance. A good tile job disappears into daily use, which is exactly how you know it was done properly.